深圳欧耐电子有限公司

• 4 wired +8 wireless zones with microcomputer control,the mainframe features comprehensive functions of burglarproof,fireproof and hold-up alarms
• ?mainframe is equipped with integrative programmable keypad,LCD,and memory of 5 groups of alarming telephone numbers
• Transmission through telephone line and alarm signal receipt via fixed telephone,moblie phone and manual/networked alarm receiving center
• Compatibility with SHIKE and Contract ID (ADEMCO) communication protocols?
• Remote control the arming/disarming of zones with remote control unit,keypad and telephone
• Built-in electronic clock makes it possible to arm/disarm different zones in fixed time,set up timer clock and report the self-check status of the mainframe in fixed time

• Alternatives of internal connecting and external connecting alarming output
• Built-in relay with linked output capable of linking video monitoring
• Wireless detetor and remote control unit capable of anto-learning of code checking
• Doorphone available for all zones,wired or wireless
• arming/disarming for different wired/wireless zones and monitoring of onsite sound
• onsite alarm for telephone line failure,line breakdown,unauthorized connection,and short circuit
• internal 12V mainrtenance-free rechargeable battery with intelligent charging/disarming for different wire/wireless zones and monitoring of onsite sound
• onsite alarm for telephone line failure,line failure,line breakdown,with intelligent charging/discharging control and longer working life
• Two operaring codes for mainframe
• auto-reporting of AC power failure,low voltage of battery and detector failure

• Dual-net alarm system with GSM wireless network plus PSTN wired telephone network
• Wired,wireless,dual networks are compatible with communication protocols of CK,Control ID(ADEMCO),SHIKE alarm receiving center
• 21 sections of 120-second sound recording for alarm conditions,which records can be broadcasted in different zones
• Chinese short message transmission information,arming/disaming through short message remote control in inter-regions
• Options of 5 groups of telephone numbers for communicaion protocols of different centers,and wired/wireless network dialing avallable

• 8 wire +8 wireless zones with microcomputer control,keypad programming and LED
• Mathing with various infrared fireproof and burglerproof detectors and emergency switches

• Automatic alarming by wireless network in case of wire network failure,and automatic alarming by wire network in case of wireless network failure?
• Built-in relay with linked output is able to link video monitoring or other equipment
• Remote control unit and wireless detector with the feature of auto-learning of code checking,which facllitate use?
• Built-in clock module of Li battery makes it possible to automatically arming/disarm in fixed time
• Data of arming,disarming,alarming,powering on/off stored for inquiry
• Auto-reporting of AC power failure,low voltage of battery and detector failu

GSM Alarm: w20

adopts SMS data transmission and voice platform of GSM network to send control command and receive alarm remotely. The system can be set delayed-arm. When a signal is detected by detectors, the detectors will send alarm signal to host immediately, then the host sends alarm SMS to its pre-set mobile phone numbers, and meanwhile dials its pre-set telephone/mobile phone numbers automatically and drive wiretap. In addition, users can dial the system and set it in arm/disarm mode by any remote phones.
Following are the specific functions
Adopt wavecome double frequency GSM module.
1.With color LCD show screen and keyboard on the host.
2. 11 wireless guarding zones (1 wireless SOS zone, 1 fire alarm zone, 1 external power failure alarm zone , and other 8 wireless guarding zones can be defined by user ).
3.Send SMS to 3 pre-set mobile phone numbers automatically while alarming.
4.Call 3 pre-set phone numbers automatically and monitor at site while alarming.
5.Set the time of arm/partial arm/disarm.
6.Arm/disarm by the keyboard on the host, remote controller or SMS.
7. Program the alarm host by keyboard or SMS.
8. Modify the name of 8 wireless guarding zones and inquire the status of host by SMS demand.
9. Define the 8 wireless guarding zones as arm/partial arm by keyboard on the host.
10. With standby rechargeable battery
11. The host automatically stores system status, while its power is off.
12.Connect with the alarm center through GSM network.

GSM Alarm : w-g10

specific functions
1. GSM alarm transmission, without connecting telephone lines and be not afraid of cutting line.
2. Adapt wavecom double frequency GSM module.
3. Nine guarding zones
1 wireless SOS alarm zone, 1 wireless fire alarm zone, 1 external power failure alarm zone, the other 6 wireless zones can be defined by user (Please note zone 05 and zone 06 can also be used as hardwire zones.)
4. The host automatically stores system status, while its power is off.
5. The system equips backup rechargeable battery .It can work while the external power is off.
6. Report the guarding zones by SMS or voice and monitor the voice at the site remotely.
7. Remote arm/disarm, and set the host by wireless keyboard, SMS or any phones.
8. You can increase/decrease detectors.
9. Connect with the alarm center through GSM network.

GSM Alarm:w10

1.very suitable for small office and home appliance.
2. Alarm system uses a GSM communicator, so is no distance limits to receive alarms or dial out to control the alarm system.
3. System can support GSM/CDMA cell phones.
4. Can store and dial 5 phone numbers (no longer than 16 character each one). If an alarm occurs, numbers will be dialed in order starting with last stored. You can set to dial monitoring center, police and owners.
5. Using remote controllers you can arm, disarm, panic from long distance.
6. You can control the system by using a telephone anytime, wherever you are. For security reasons a PIN code must be used for access.
7. Supports all kinds of wireless sensors, such as PIR detectors, door (gap) sensors, gas sensors, smoke sensors; panic buttons and infrared balusters are available.
8. ?Supports any wired sensors available (NC contacts)
9. ?Supports any combination of wired/wireless sensors, as you need.
10. No need for fixed telephone line. Is very suitable for cottage, house, shop, garage, everywhere a GSM Network is present.
11. For weak GSM signal area an external antenna can be used.
12. Three open collector outputs available to be used according to customer demands
13. One onboard relay available for customer application.
14. Easy to be installed and operated according to the instructions from this manual.

GSM dialling terminal;wd8

Providing 900 and 1800 GSM connectivity
● Simple to install/easy to maintain
● Allow PIN code entering and reciprocal phone-card lock
● Provide optimized circuit directly connecting the exchange device
● for extensions
● LCD with back screen display billing ,signal, caller id.
● Polarity reversal signal for metering
● 3.5dBi gain antenna
● Compatible to PABX or VOIP gateways or a telephone
● Suitable for call termination of ISP
● Incoming call reminder, time display

GSM power alarm: c50

The GSM alarm system adopts GSM network and Digital Signal Processing technology, and is widely used in security field. This system is mainly applied to the security of power transformer, electric transmitting line and street lamp line etc. With the advantages of good waterproofness, practicability, good quality and stability& credibility etc, the GSM power alarm can be used in various environment of outdoor. With SMS data transmission and voice platform of GSM network, it is really realizes wireless alarm control and remote managements and solves the limitation of wired data transmission in telephone and wired network.

With 8 routes of wired input alarm.

* Monitor 3 phase loss voltage and single phase failure of the electric distribution network.

* Can connect line-cut/movement/vibration sensors etc.,?? It will alarm when power transformer is damaged or moved.

* Send SMS to 6 preset mobile phone numbers automatically while alarming.

* Auto-dial 2 preset phone numbers and monitor the alarm site while alarming.

* Can program the alarm host and inquiry its status by SMS demand

* Can report the communication status of alarm host in fixed time everyday.

* Can set fixed-time arm/disarm.

* Completely sealed aluminum outer shell: ?waterproof, anti-corrosion, fireproof, strike preventing which are suitable for outdoor installation.

* Resist electromagnetic interference, lighting and thunder(New)

* The system has power-off protection function. When the external power supply is damaged or the power is off, the system can continue to work with a backup battery.

* Can install the solar battery that can supply the power for alarm host and charge the backup battery.(New)

* External power failure alarm: when the system checks out that there is something wrong with the external power or the external power is off for more than 2 seconds, it will alarm immediately

* Can connect with the alarm center through GSM network.